VITA CAD-Waxx is a residue-free acrylic polymer that can be fired and used for the computer-aided production of wax-ups in the press and casting technique. It is used as an aid for the digital wax-up technique.
VITA CAD-Waxx
Solutions for wax-ups and drilling templates.
Direct
Restorations can be tried in the mouth.
Efficient
Impressive wall and connector thicknesses can be defined for VMK substructures, which is why very little post-processing is required.
Flexible
Ground moulds can be combined with casting wax or the prefabricated parts known from casting procedures.
For the fabrication of pressed/cast objects and drilling templates
VITA CAD-Waxx blanks are transparent.
Discs (Ø 98.4 mm):
- h 20 mm
Blocks (mm):
- CW-40 (14 x 15 x 40 mm)
VITA CAD-Waxx products
VITA CAD-Waxx for inLab®
Description | Prod. no. 10 pcs. |
---|---|
CW-40/15 |
EC4CW4010 14 x 15 x 40 mm |
VITA CAD-Waxx DISC
Description | Prod. no. 1 pc. |
---|---|
Ø 98.4 x h 20 mm | ECCWD98201 |
VITA CAD-Waxx – SYSTEM SOLUTIONS*
VITA offers VITA CAD-Waxx with specific holder systems for the CAD/CAM systems:
- CEREC/inLab (Dentsply Sirona)
VITA CAD-Waxx – UNIVERSAL SOLUTIONS*
VITA offers VITA CAD-Waxx in a universal DISC geometry (Ø 98.4 mm) for the CAD/CAM system:
- inLab MC X5 (Dentsply Sirona)
Note: VITA CAD-Waxx DISCs can be processed with all open CAD/CAM systems, which are suitable to mill discs with a diameter of 98.4 mm (including the circumferential groove).
*) Note: The range of VITA CAD/CAM material versions/geometries/shades available may vary for individual CAD/CAM system partners or systems. The hardware and software requirements in each case are available from the respective CAD/CAM system partners.
Easy download for multiple documents
Download a .zip file containing all the selected files in a single step.Simply tick the files then click here.