VITA ENAMIC multiColor is the hybrid ceramic blank for reproduction of the natural shade gradient at the push of a button. This CAD/CAM blank has an integrated shade gradient from cervical to incisal area.
VITA ENAMIC® multiColor
CAD/CAM blank made of hybrid ceramics

- fabricating durable restorations using a high-load capacity hybrid ceramic with absorption of masticatory forces
- non-/minimally invasive restorations possible since the elastic hybrid ceramic enables reduced wall thicknesses
- fabricating accurate, precise and delicate restorations using a hybrid material with integrated elasticity
- cost-effective reconstruction, thanks to time-saving CAM fabrication and efficient polishing without any firing process
Recommended indications*
- esthetic crown restorations with vivid play of color/light
- delicate (non-prep) veneers for cosmetic reconstructions
*) These are recommended indications; the entire range of single tooth restorations can normally be fabricated. For details, please refer to the respective working instructions of the products.
VITA SYSTEM 3D MASTER®, high translucent (HT)
1M1, 1M2, 2M2, 3M2, 4M2
Blocks (mm):
- EMC-14 (12 x 14 x 18)
- EMC-16 (18 x 16 x 18)
VITA ENAMIC® multiColor products
VITA ENAMIC® multiColor for Cerec®/inLab
Description | Prod. no. 5 pcs. |
---|---|
1M1-HT, EMC-14 |
EC4EC4062765 12 x 14 x 18 mm |
1M1-HT, EMC-16 |
EC4EC4062885 18 x 16 x 18 mm |
1M2-HT, EMC-14 |
EC4EC4072765 12 x 14 x 18 mm |
1M2-HT, EMC-16 |
EC4EC4072885 18 x 16 x 18 mm |
2M2-HT, EMC-14 |
EC4EC4122765 12 x 14 x 18 mm |
2M2-HT, EMC-16 |
EC4EC4122885 18 x 16 x 18 mm |
3M2-HT, EMC-14 |
EC4EC4202765 12 x 14 x 18 mm |
3M2-HT, EMC-16 |
EC4EC4202885 18 x 16 x 18 mm |
4M2-HT, EMC-14 |
EC4EC4282765 12 x 14 x 18 mm |
4M2-HT, EMC-16 |
EC4EC4282885 18 x 16 x 18 mm |
VITA ENAMIC® multiColor UNIVERSAL VITA S
Description | Prod. no. 5 pcs. |
---|---|
1M1-HT, EMC-14 |
EN1EC4062765 12 x 14 x 18 mm |
1M1-HT, EMC-16 |
EN1EC4062885 18 x 16 x 18 mm |
1M2-HT, EMC-14 |
EN1EC4072765 12 x 14 x 18 mm |
1M2-HT, EMC-16 |
EN1EC4072885 18 x 16 x 18 mm |
2M2-HT, EMC-14 |
EN1EC4122765 12 x 14 x 18 mm |
2M2-HT, EMC-16 |
EN1EC4122885 18 x 16 x 18 mm |
3M2-HT, EMC-14 |
EN1EC4202765 12 x 14 x 18 mm |
3M2-HT, EMC-16 |
EN1EC4202885 18 x 16 x 18 mm |
4M2-HT, EMC-14 |
EN1EC4282765 12 x 14 x 18 mm |
4M2-HT, EMC-16 |
EN1EC4282885 18 x 16 x 18 mm |
VITAVM®LC
Light-curing, microparticle composite for extraoral use with fixed and removable restorations
VITA AKZENT® LC
Reliable reproduction of individual shade effects
VITA ENAMIC® Polishing Set
For simple pre- and high-gloss polishing of VITA ENAMIC hybrid ceramic
VITA ADIVA® FULL-ADHESIVE
The full-adhesive luting system with perfectly matched components for conditioning tooth substance and restorative material
VITA ADIVA® SELF-ADHESIVE
The self-adhesive luting system with perfectly matched components for conditioning the restorative material
VITA ENAMIC multiColor – SYSTEM SOLUTIONS*
VITA offers VITA ENAMIC multiColor with specific holder systems for the CAD/CAM systems:
- CEREC/inLab (Dentsply Sirona)
- PlanMill 40/PlanMill 40S/PlanMill 50S (Planmeca)
- Ceramill mikro IC/Ceramill Motion 2/Ceramill Matik (Amann Girrbach AG)
VITA ENAMIC multiColor – UNIVERSAL SOLUTIONS*
VITA offers VITA ENAMIC multiColor with universal holder system for the CAD/CAM systems:
- CORiTEC Serie (imes-icore GmbH)
- Röders RXD Serie (Röders GmbH)
- DGSHAPE DWX Serie (DGSHAPE Corporation)
- CS 3000/CS 3100 (Carestream Dental, Inc)
- Zfx Inhouse5x (Zfx GmbH)
- Milling UNIT M Serie (Zirkonzahn S.r.l.)
- N4/R5/S1/S2/Z4 (vhf camfacture AG)
- Organical Desktop Serie (R+K CAD/CAM Technologie GmbH)
- DMG ULTRASONIC-Serie (DMG Mori AG)
*) Note: The range of VITA CAD/CAM material versions/geometries/shades available may vary for individual CAD/CAM system partners or systems. The hardware and software requirements in each case are available from the respective CAD/CAM system partners.
Easy download for multiple documents
Download a .zip file containing all the selected files in a single step.Simply tick the files then click here.