USAIt appears that you are currently in USA.
Confirm
Select a different country
ProductsDigital DenturesAccessoriesVITA VIONIC® BOND

VITA VIONIC® BOND

Efficient adhesive bonding of denture teeth with denture bases

VITA VIONIC BOND is a MMA-based self-curing two-component bonding system for fixation of denture teeth in denture bases. It has a low-viscosity consistency for precise application to the adhesive surface and forms a reactive boundary layer on the adhesive surfaces for a secure bond.

VITA VIONIC BOND is available as a single-dose system (for the bonding of two dental arches) and as VITA VIONIC BOND multiDose (for the bonding of approx. 25 dental arches).

Reliable bonding.
Self-curing, two-component system provides a secure bond.
Precise, seamless bonding.
A small film thickness in the cavity makes precise, seamless fixation possible.
Simple and fast.
A fast, clean workflow with a secure bond.

Indications

For permanent bonding of denture teeth from the VITA VIONIC product series in the corresponding cavities of prosthetic bases made of compatible denture base materials.

Content

VITA VIONIC BOND KIT
Contents
1 x 2 ml VITA VIONIC BOND I
1 x 1 ml VITA VIONIC BOND II
3 x Microbrush

Sufficient for bonding approx. 28 denture teeth

VITA VIONIC BOND multiDose COMPLETE
Contents
1 x VITA VIONIC BOND multiDose KIT
1 x VITA VIONIC BOND multiDose measuringcup, 3 ml
1 x Disposablebrushtips, 50 pieces

Sufficient for bonding approx. 25 x 14 denture teeth

VITA VIONIC BOND multiDose KIT
Contents
1 x 20 ml VIONIC BOND I multiDose
1 x 10 ml VIONIC BOND II multiDose
1 x Disposablebrushtips, 50 pieces

Sufficient for bonding approx. 25 x 14 denture teeth

VITA VIONIC BOND multiDose measuringcup, 3 ml

VITA VIONIC® BOND

VITA VIONIC BOND KIT
AD9VBK
Quantity Content Material
1 2 ml VITA VIONIC BOND I
1 1 ml VITA VIONIC BOND II
3 1 pc. Microbrush
Instructions for use

No. 10454 VITA VIONIC SOLUTIONS (Version 006)

DE
EN
ES
FR
IT

No. 10454 VITA VIONIC SOLUTIONS (Version 005)

RU

No. 10823 VITA VIONIC SOLUTIONS - Workflow 3Shape (Version 001)

DE
EN
ES
FR
IT

No. 10824 VITA VIONIC SOLUTIONS Workflow exocad (Version 001)

DE
EN
ES
FR
IT

No. 922-11533 Short GA. VITA VIONIC BOND KIT (Version 003)

DE
EN
ES
FR
IT

No. 922-13100 GA short. VITA VIONIC BOND multiDose (Version 001)

DE
EN
ES
FR
IT
Brochures

No. 10251 VITA PROTHETIK LÖSUNGEN (D) (Version 009)

DE

No. 10251/1 VITA PROSTHETIC SOLUTIONS (Europa) (Version 009)

EN
ES
FR
IT

No. 10251/1 VITA PROSTHETIC SOLUTIONS (Europa) (Version 008)

PL

No. 10355/1 VITA VIONIC SOLUTIONS (World) (Version 006)

EN
ES
FR
IT
RU

No. 10617 VITA VIONIC VIGO (Version 002)

FR
IT
NL
PT

No. 10883 VITA VIONIC SMART Level (Version 001)

DE
EN
ES
FR
IT

No. 10883 VITA VIONIC SMART Level (Version 001)

EN-US

No. 10884 VITA VIONIC ECONOMY Level (Version 001)

DE
EN
ES
FR
IT

No. 10885 VITA VIONIC PREMIUM Level (Version 002)

DE
EN
ES
FR
IT
Order blocks

No. 10668M VITA VIONIC SOLUTIONS (Version 006)

DE
EN
ES
FR
IT
Product video

Workflow Video_VITA VIONIC DENT DISC multiColor_2023-06-16 (Version 001)

EN

Workflow Video_VITA VIONIC VIGO_IDS_2023-03-06 (Version 001)

EN
Safety data sheets

SD288 VITA VIONIC BOND I (Version 006)

BG
CS
DA
DE-CH
DE-AT
DE
EL-CY
EL
EN-US
EN-MT
EN-IE
EN-CA
EN
ES-US
ES
ET
FI
FR-CH
FR-CA
FR-BE
FR
HR
HU
IS
IT-CH
IT
JA
KO
LT
LV
NL-BE
NL
NO
PL
PT-BR
PT
RO
RU
SK
SL
SR
SV
TR
UK
ZH

SD289 VITA VIONIC BOND II (Version 005)

BG
CS
DA
DE-CH
DE-AT
DE
EL-CY
EL
EN-US
EN-MT
EN-IE
EN-CA
EN
ES-US
ES
ET
FI
FR-CH
FR-CA
FR-BE
FR
HR
HU
IS
IT-CH
IT
JA
KO
LT
LV
NL-BE
NL
NO
PL
PT-BR
PT
RO
RU
SK
SL
SR
SV
TR
UK
ZH
General Risks

General Risks (Version 002)

DE
EN
ES
FR
IT
RU
Residual Risks

VITA VIONIC BOND (Version 002)

DE
EN
ES
FR
IT
RU

Easy download for multiple documents

Download a .zip file containing all the selected files in a single step.
Simply tick the files then click here.
Download .zip file

What do I have to consider with regard to the components to be bonded?

The components to be bonded (denture teeth, denture base) have to fit together precisely, as VIONIC® BOND does not fill gaps.

For the specification in the design software (Denture Module from 3Shape A/S or exocad GmbH), we recommend:

  • For milled denture bases in combination with VITA VIONIC VIGO® prefabricated tooth: 40 µm bonding gap.

 

  • For milled denture bases in combination with milled denture tooth elements made of VITA VIONIC® DENT DISC multiColor: 80 µm bonding gap.
  • Larger gaps may be necessary for 3D-printed denture bases.

Tip: The denture tooth elements should fit into the corresponding alveoli of the denture base without force, but at the same time, they should also not have any noticeable play.

The bonding surfaces of the components must be dry and free of dust, grease, wax, cooling lubricants and other contaminants.

What is VITA VIONIC® BOND or VITA VIONIC® BOND multiDose?

VITA VIONIC® BOND or VITA VIONIC® BOND multiDose are components of VITA VIONIC® SOLUTIONS, the system for the digitally supported removable dentures from VITA Zahnfabrik.

What advantages does the adhesive have over comparable competitor systems?

  • A simple, clean bonding process.
  • Proven good adhesion, tested according to ISO 22112 and DIN ISO/TS 19736.
  • The precise fit of the denture teeth with the denture base is maintained, meaning that little to no manual reworking is required (e.g., little to no adjustment of the occlusion).

What can be bonded with VITA VIONIC® BOND or VITA VIONIC® BOND multiDose?

Acrylate-based materials (PMMA and acrylate-based composites). Used especially for permanently bonding denture teeth:

  • VITA VIONIC VIGO® prefabricated teeth or
  • milled denture tooth elements made of VITA VIONIC® DENT DISC multiColor

with

  • milled denture bases made of VITA VIONIC® BASE DISC HI.
  • Furthermore, the adhesive bond achieved with VITA VIONIC® BOND has been validated on various 3D-printed denture base materials from the competition. List: https://www.vita-zahnfabrik.com/vionic_compatibility

How do VITA VIONIC® BOND and VITA VIONIC® BOND multiDose cure?

VITA VIONIC® BOND and VITA VIONIC® BOND multiDose are self-curing. The curing process begins as soon as the two components of the adhesive come into contact with each other. At an ambient temperature of approx. 21 °C (70 °F), the working time is approx. 10 minutes. If the adhesive begins to gel or form threads, discontinue use.

How should VITA VIONIC® BOND or VITA VIONIC® BOND multiDose be stored?

Always store it tightly closed in the refrigerator between 5 °C (41 °F) and 10 °C (50 °F). Protect from direct sunlight.

What is the shelf life of VITA VIONIC® BOND multiDose after opening?

If stored correctly (closed tightly at a temperature between 5 °C and 10 °C, that is, 41 °F and 50 °F), it should be used within 90 days of opening.

What is the chemical composition of VITA VIONIC® BOND and VITA VIONIC® BOND multiDose?

 

VIONIC BOND® I and VIONIC BOND® I multiDose:

Chemical composition

wt.%

methyl methacrylate

70 - 80

acrylic polymer based on methyl methacrylate

15 - 25

triethylene glycol dimethacrylate

< 4

dibenzoyl peroxide

< 2

other

< 1

  

VIONIC BOND® II and VIONIC BOND® II multiDose:

Chemical composition

wt.%

methyl methacrylate

> 95

N,N-dimethyl-p-toluidine

< 5

 

What is the difference between the two products VITA VIONIC® BOND KIT and VITA VIONIC® BOND multiDose?

The adhesive is the same, only the dosage type is different.

  • VITA VIONIC® BOND KIT is a single-use application that contains enough material to bond approx. 28 denture teeth. The components come pre-measured and do not need to be dosed.
  • VITA VIONIC® BOND multiDose is designed for multiple applications. The components have to be dosed by the user with the measuring cup. It contains enough material to bond approx. 25 x 14 denture teeth to the respective denture bases.

All other processing and mechanical/physical properties of the adhesive are identical.

How is VITA VIONIC® BOND multiDose dosed?

Please use the reusable VITA VIONIC® BOND multiDose measuring cup for dosing and mixing.

Dosing table:

Number of teeth to be bonded

Total quantity of adhesive required

Comprised of

Dosage VIONIC® BOND I multiDose

Dosage VIONIC® BOND II multiDose

1 tooth arch (14 teeth)

1.0 ml

= recommended minimum mixing quantity

2 graduation marks on measuring cup

1 graduation mark on measuring cup

2 tooth arches (28 teeth)

2.0 ml

4 graduation marks on measuring cup

2 graduation marks on measuring cup

 

Dosing instructions, here in the example for the total quantity of 1 ml (sufficient to bond 14 denture tooth units):

For further processing instructions, see instructions for use for VITA VIONIC® BOND multiDose (922-13100).